minimalist beer or cold drink mug
Print Profile(1)
Description
Boost Me (for free)
Mug for beer or cold drinks suitable for a 20 oz stainless steel tumbler it can be printed in two colors or a single solid color you can paint it in your preferred slicer I leave you the link. for the stainless steel tumbler on amazon
https://www.amazon.com/-/en/dp/B07Y83M898?ref=ppx_pop_dt_b_asin_image&th=1
3D PRINTING PARAMETERS
This STL file is recommended for FDM printers!
PLA filament
3D Print Time
in 2 colors - 6 hours and 22 minutes*
in 1 color - 5 hours and 34 minutes*
(may vary depending on your printer model)
Approximate height: 16 cm
You can paint it in the slicer to your preferred color
*Note: Print time based on a Bambu Lab A1 printer,
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
Line Width/Nozzle: 0.4 mm
Recommended initial layer height: 0.2 mm
Recommended layer height: 0.2 mm
Recommended perimeters/walls: 2
Recommended infill (%): 15% (Gyroid)
Supports needed: yes
Build plate adhesion: yes a little
Others:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)