Hyundai N + Kia 2.0t BOV/Recirc Flange Plate
Print Profile(1)
Description
**DISCLAIMER** USE AT OWN RISK! Compressor surge sounds really good but, it's not really good for your turbo! Look up videos on what it does to turbos! It's mostly meant for BOV/Recirc relocation as I run a Tial 50mm BOV and the space gets tight.
I won't tell you what to do but, I will tell you it has held 29+PSI with no boost leaks and withstood ~150F without any issues for several days (I print in ABS and tested with a infrared thermometer) and without a BOV…and let's just say, it sounds glorious.
Now, this a plate to block off the blow off valve flange on a Hyundai N or Kia 2.0t vehicle. I used my Hyundai Elantra N for testing. I used Permatex gasket maker to seal it and I may redesign it to fit the OEM gasket. I made this in a pinch and thought someone else might need the design so I uploaded it. I'm excited to see what y'all do with this!
Printed on a BL P1S
Filament: Creality ABS - Black
Nozzle: 0.6mm
Nozzle Temp: Initial 260C to 270C
Bed Temp: 100C
Infill: 100%
Walls: 4
Layer Height: 0.18mm
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (1)