Divinity Original Sin 2 Game Poster - Hueforge
Print Profile(1)
Description
NOTE: I think this image works better with yellow but most red oriented hueforges use yellow so I needed something else for my wall. But You can use yellow instead of beige. Attached example image from hueforge.
This was made specifically to visually match https://makerworld.com/en/@Lumpy3D collection because I found some items missing which might be more niche to bother him with.
Check out his huge amazing collection here: https://makerworld.com/en/collections/1128105-all-my-free-hueforges
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.39x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2mm and the Actual Thickness is 2mm
#000000 PLA #BambuLab Basic Black Transmission Distance: 0.6
#c12e1f PLA #BambuLab Basic Red Transmission Distance: 4
#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8
#ffffff PLA #BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #9 (0.8mm) swap to Beige
At layer #13 (1.12mm) swap to Jade White for the rest.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)