Drawn to dawn Ina ancient one microphone

Ina Ancient one microphone Assembly Guide

This prop required super glue in certain area, it will be mention when needed

  1.  Glue the decorative piece to the handle pin

  2.  Assemble the mic body. The 2 pins provide enough friction to hold the middle pieces, only need to Glue the left and right cover piece and the eye deco

   3.   Slide in the handle pin into the outer ring, no glue needed

   4.   Put in the assembled mic body, Glued it to the handle pin. At this point the mic + handle pin should move freely up and down

 inside the ring

   5.   Glued in left outset deco, this will help centering the mic pin and guide the rest of the deco. Then follow the order shown below and place the decorative parts, then insert pin. Once the pin inserted Glued all the decorative parts. At last insert handle and only apply glue when the handle almost fully insert.

Have Fun using this model in cosplay