PCP sound compensator.
Print Profile(0)
Description
this is an addition (not bulky and functional) to the original ,
Boost Me (for free)
it's my first project thanks.
once the files are printed, before coupling the pieces, wrap cotton, sound-absorbing material, or similar on the perforated part , if you don't want to glue the pieces, put electrical tape (as I did) to be able to inspect the inside . it doesn't need clamps , at the moment of insertion, be careful because being precise it will create some friction but if you want you can use some WD-40 or similar, the sound is drastically reduced if we are talking about full power. as for the slicing parameters using PLA or PETG, I left the originals both on ENDER 3 with Sonic Pad and on AnkerMake M5C with good results in terms of both quality and print times.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)