1:1 transfer case for 1:14 Tamiya truck models
Print Profile(1)
Description
A 1:1 transfer case for all-wheel drive in 1:14 Tamiya truck models. It fits into the chassis. A drilling template is included. Input at the top for Servonaut gear motors, output at the bottom to the axles, e.g., Lesu. The screw holes may need to be re-drilled with a 2mm drill bit. With one of my printers, it fits without, with the other, I had to rework it. It is best to rework the inner surfaces with a sander so that the support structure is completely removed. Four Tamiya 5x11x4mm ball bearings, two Traxxas 18-T pinions, and a 4.9-5mm silver steel shaft are required. Dimensions for the shafts are attached as an image. I used Tamiya grease. 12x M2x20mm screws and nuts are used for fastening.
Bearings: 5x11x4 Tamiya
https://www.amazon.de/dp/B0B634LG61?ref=ppx_yo2ov_dt_b_fed_asin_title
Gears: Traxxas gear, 18-T pinion (1.0 module) 5mm shaft
https://www.amazon.de/dp/B07B6SR6P3?ref=ppx_yo2ov_dt_b_fed_asin_title
Shaft: Silver steel shaft Reely (Ø x L) 5 mm x 500 mm
https://www.conrad.de/de/p/silberstahl-welle-reely-o-x-l-5-mm-x-500-mm-237078.html
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)