Bambulab Poop Chute (X2D/P2S/X1C/P1S)Removable Bin

🚀 Poop Chute Snap-Out + Parametric Bin – Quick Emptying and Zero Mess!

Poop Chute Update V2 – X2D / P2S with External Exhaust Fan Kit  (17/05/26)

The new customizable version of the V2 Poop Chute for X2D / P2S is available

✨ Key features:

• Advanced parametric system introduced for the magnet seat
• Integrated automatic tolerances:
  • +1.0 mm on diameter for easy and secure insertion
  • +0.2 mm in depth for a perfect fit
• Increased fit reliability and better tolerance for FDM prints

🧩 Maximum customization:

Now you can configure the model based on your magnets:

• Number of magnets (limited by available space in the chute)
• Diameter (based on your magnets)
• Seat depth (up to max 3 mm)

The model automatically adapts to the entered values, without the need for manual modifications

📌 IMPORTANT

👉 The V2 file is in the “Customize” (Customizable) section
From there you can automatically generate the perfect version for your magnets

NEW PROFILE!!! (15/05/26)

V2 – X2D / P2S with External Exhaust Fan Kit

V2 retains all the features of V1, but is optimized for the Bambu Lab external exhaust fan kit on P2S and X2D Designed to ensure proper clearance and a precise fit where the original model is not compatible

🧩 Parametric Bin – the bin is fully modifiable to adapt capacity and dimensions to your needs.
⚠️ Only the bin is parametric, the poop chute remains fixed.

Poop chute with removable “Snap-Out” bin designed to empty purge waste in seconds, without having to move the printer

🌟 Key features

• Snap-Out – remove the bin laterally, the poop chute remains mounted
  • Optimized Flow – internal anti-jamming curves
  • Honeycomb Design – light, strong, and aesthetically clean
  • Integrated Magnets – solid fastening on the metal casing
  • Parametric Bin – customizable based on desired space or volume

🛠 Compatibility

✅ Bambu Lab X2D

✅ Bambu Lab P2S with External Exhaust Kit

✅ X1 Carbon (X1C)
✅ P1S

🧲 Required magnets
4× 10 mm × 1 mm neodymium magnets
https://www.amazon.it/dp/B0D41KKVR6?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

🖨 Tested print parameters

Layer: 0.20 mm
Walls: 2
Infill: 10%

Supports: NOT REQUIRED – self-supporting geometry

💡 100% Original

This model was entirely rebuilt from scratch in Fusion 360.
Inspired by the concept of TrocheHole, every dimension, radius of curvature, and interlocking system is unique.
No original files were modified or reused.

⭐ Support the project

If you print it:
• leave a rating ⭐⭐⭐⭐⭐
• share a photo of your print