Area 51 - White Sands New Mexico Coasters

Area 51 Coasters

These coasters are larger and in a oval type shape compared to regular coasters. They are aprox 135mm x 100mm x 3mm thick.
 

I have created the coasters, plus a special holder and a template (for cutting the cork adhesive backing) on four separate plates to make it easier to deal with. 

I put two coasters on a plate which should be just fine if you have a printer like the X1C, P2S or A1. If you have a Bambu H2S you can put four coasters on the plate which will save you some time

These are the cork adhesive backings that I used from Amazon  https://a.co/d/0g3SP6gQ
 

I made a template to cut the cork easier with an exacto knife. I put a piece of double sided tape on the template to help keep it from sliding while cutting around the edge.
 

Take a look at my other railroad and non-railroad coasters and clocks at https://makerworld.com/en/@railimages