vegeta-patada-cell

Project: vegeta-patada.hfp

Print with 100% infill, 0.08 mm layer height, and 0.2 mm base layer.

The model measures 100 x 150 mm.

You can print with higher layer heights, below the 0.52 mm base thickness.

The maximum allowed thickness is 2.28 mm and the actual thickness is 1.79998 mm.

#000000 PLA BambuLab Basic Black. Transmission distance: 0.6

#8c9099 PLA PolyLite Gray. Transmission distance: 1

#e2dedb PLA PolyLite White. Transmission distance: 5
This print uses 3 different filaments.

Filament change instructions:

Start with black.

At layer 10 (0.92 mm), change to black.

At layer 16 (1.4 mm), change to gray.

At layer 20 (1.72 mm), change to white for the remainder.