Garden Cane Tri Support Screw Fixing 8mm-30mm cane

Hi! 

    here are my Garden Cane Tri Supports with screw fixing points for each cane. There are 24 different versions with the legs angled at 60° & 70° from horizontal. Hole sizes in the supports go from 8mmØ to 30mmØ in 2mm steps (8,10,12 ect). I have place one of each size on its own build plate so it should be easy to pick the size you need.

 I designed these afer getting fed up with weak store purchased ones. I added a screw fixing point for a standard  countersunk wood screw (4mmØ with a 90° countersink). I placed the canes in the Tri Support and used a 3mmØ wood drill to create a pilot hole for the screw. Screw lengths required are 35-50mm depending on the size of the cane, I used 40mm ones for mine. 

Please have a look at the attached diagram to give you an overview. The Tri Support also has a horizontal cut out and a center hole. This is so you can suspend a hanging basket in the middle of the tripod or connect a horizontal cane to form a bridge (see pictures). The center hole also has cut outs for a 7.6mm cable tie. This is so you can firmly secure a horizontal bridge cane. 

I hope this helps you in your garden and you flowers grow tall!

Have fun!

R.W.W.