Search models, users, collections, and posts
ESP32 Water Meter / Water-meter / AI on the edge
Remixed by
IP Report
Print Profile(1)
0.2mm layer, 4 walls, 15% infill
Designer
5.3 h
2 plates
Open in Bambu Studio
Boost
3
4
0
0
5
1
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Bambu Filaments
Select all
Description
Content has been automatically translated.
I adapted the model (https://makerworld.com/en/models/529380-ai-on-the-edge-device-housing#profileId-446500) so that it fits my water meter. You need an M4 tap to cut threads. M4x8 screws are also required. The cover of the water meter must be removed
Note: You may need to file down the tabs (see picture) so that it can be slid on easily
I modified the model (https://makerworld.com/en/models/529380-ai-on-the-edge-device-housing#profileId-446500) so that it fits my water meter. You’ll need an M4 tap to cut the threads. You’ll also need M4x8 screws. The cover of the water meter must be removed
Note: You may need to file down the tabs (see picture) so that it slides on easily
Boost Me (for free)
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)