BMW Toolbox

Here I have a nice toolbox for you with internal dimensions of 230mmx100mm. Of course, as a BMW fan, it has to have the right logo :-).

In the print profile, the lids are available with the double R logo and with the GSA logo. If you want the case exactly like this, you can use my print profile. For the rest of you, I have provided all parts as step files. The lid is also available without a logo as a step file. 

The box was printed on the X1Carbon.  

I used PETG HF from BambuLab

Case Shell:

You can print the case shell with the standard print settings. I have only set the feed rate of all surfaces to 90mm/s in my print profile.

Lid:

I printed the lid on a Bambu 3D Effect Plate Carbon. It is important here to print the first layer at 8-10mm/s and increase the nozzle temperature to 250°C. I would suggest simply using my settings from my print profile. An AMS is necessary here.

Clasp:

I positioned the clasp on the printing plate so that there are 2 filament changes. This would also allow printing without AMS. You only need to define the filament change as a pause in the slicer and perform a manual change.

Assembly:

For assembly, you will need 6x M3x35mm cap head screws and a 2.5mm hex key. The screw holes are designed so that the screws can be easily screwed in without post-processing. Please tighten GENTLY!

Otherwise, there's not much else to say about the toolbox.

Please treat my data fairly and observe the license terms. A lot of time went into the design, and I am not paid for it

Thank you & Happy Printing…