Pull-out parts organizer for ziplock bags

A parts storage solution based on self-sealing bags

Compared to traditional organizers, it offers higher space utilization, is easier to sort, organize, and label, and provides better sealing, making it more suitable for storing a small number of diverse parts

Supports modular stacking of storage racks

Can be fixed under shelf boards or table tops to improve space utilization

Requires m3*30 socket head cap screws

m3*18 socket head cap screws

m3 nuts

40cm drawer slides (a pair of slides can make two)

Recommended to use 90*130 self-sealing bags with a thickness of 0.20mm or more

You can stick sticky notes on the self-sealing bags for labeling

The self-tapping screws included with the slides are sufficient. If there are not enough, you can buy m3.5*14 countersunk head self-tapping screws

It's best to use socket head cap screws; with a ball-end bit, screws can be tightened from the side. You can find the bit handle I use here

A new version with an adjusted center of gravity has been added. This version has better single-row load-bearing capacity but heavy items cannot be fixed behind the organizer

If there are no slides, you can also use the provided fixing blocks to fix it directly to both sides of the shelf

A new version compatible with 40cm and 45cm drawer slides has been added, compatible with this no-shelf solution. This organizer, which also serves as a workbench, is made primarily from inexpensive 1515 square tubes, combined with various three-way connectors and fixing blocks. The height is moderate, and no drilling/welding or professional skills/tools are required