Gaara hueforge

Print with 100% infill, 0.08 mm layer height, and 0.2 mm base layer.

The model measures 84.15 x 150 mm.

You can print with greater layer heights, below the 0.52 mm base thickness.

The maximum allowed thickness is 2.28 mm and the actual thickness is 2.28 mm.

#080a0d PLA PolyLite Black: Transmission distance: 0.3

#c00d1e PLA Bambulab Red Basic: Transmission distance: 4

#8c9099 PLA PolyLite Gray: Transmission distance: 1

#e2dedb PLA PolyLite White: Transmission distance: 5
This print uses 4 different filaments.

Change instructions:

Start with black.

At layer 7 (0.68 mm), change to red.

At layer 17 (1.48 mm), change to gray.

At layer 20 (1.72 mm), change to white for the remainder.