Print Profile(1)
Description
This basket was specifically designed for the 30x50 cm DryFermbag system
Why this design
* Perfect Fit: With dimensions of 22 x 22 x 3 cm, exactly two of these baskets fit side by side into a standard 30x50 cm drying bag
* Maximum Airflow: The honeycomb structure (hexagon) ensures 360° ventilation for your blossoms. This prevents "flat spots" (flattened areas) and moisture buildup
* Printed on a Bambu Lab A1 (or comparable) in under 3 hours
* Dimensionally Stable: Despite the low material consumption, the frame is stiff enough to safely protect the blossoms when the bags are moved or checked
Recommended print settings (Optimized for Bambu Lab A1/P1/X1):
* Material: PLA (Standard)
* Layer Height: 0.20 mm
* Wall Lines: 3 (Important for the stability of the honeycomb walls)
* Infill: 5% Gyroid
* Support: Not required
Usage:
1. Print two baskets for one 30x50 cm bag
2. Distribute your freshly trimmed blossoms loosely in the baskets
3. Slide the baskets into the Dryfermbag
4. The rigid structure allows you to move or check the bags in the tent without crushing the valuable blossoms
Powered by MakerWorld-Parametric Model Maker (https://makerworld.com/makerlab/parametricModelMaker)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)