Hockenheimring 3D Miniature
Print Profile(2)
Description
3d miniature of the Hockenheimring Baden-Württemberg in Germany!
This miniature has been completely re-created for improved printability & full multicolor support! 🎨
Printable Frame:
https://makerworld.com/en/models/2691009-printable-frame-for-3d-miniatures
Check out my collection of other miniatures:
https://makerworld.com/en/collections/146964-all-miniatures
Collection of other Motorsport / Racetrack miniatures:
https://makerworld.com/en/collections/450282-motorsport-f1-miniatures
🖌️ Coloring Details
Filament colors used in the model photos:
- Bambu Basic Orange (racetrack)
- Bambu Matte Ash Gray (buildings & roads)
- Bambu Basic Dark Gray (vegetation)
- Bambu Matte Black (terrain)
- Sun-lu Dark Gray / Sun-lu Sky Blue (water)
- Bambu Matte Black (frame)
These colors are based on personal preference and the filaments I had available.
Try experimenting with different color combinations to suit your style!
I highly recommend Matte filaments!
This model looks great even if printed with a single color, so an AMS is not necessarily required.
🖨️ Slicing & Printing Details
This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.
Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!
Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls (can also enable “Detect Thin Walls”).
🖼️ Framing Details
This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.
Personally I use these cheap frames from Amazon: https://www.amazon.com/dp/B0C8HY7YSQ
And blue printer paper: https://www.amazon.com/dp/B00006IDQT
(non-affiliate links)
I've also uploaded a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities!
For this model, I actually printed the water plate with a light-gray filament and used that in my frame.
A frame is not required! This model looks great by itself and can be displayed almost anywhere.
Model created in Blender using data primarily from the Blosm addon.
Membership
Subscribe for a Commercial License to sell physical prints of my models! License stays valid as long as the subscription is active.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)