Ball Protection Guard

3D-printed Ball Guard for Wall-Mounted Devices and Sensors

This protective cover serves to secure sensitive devices against unintentional damage from ball impact or other mechanical influences. The model is particularly suitable for installations in sports halls, schools, and public facilities.

Compatible with

• NOVOS3
• WRF04
• FTW04
• USE series devices

Features

• Protection against direct hits
• stable design with side mounting surfaces
• ideal for technical indoor applications

Recommended Material: PETG

PETG is recommended for this model because its good impact resistance and suitability for everyday use make it particularly well-suited for functional protective components.

The model was successfully printed with transparent PETG.

When processing transparent PETG, please note:

• a lower print speed improves optical transparency
• at the same time, this significantly increases print time
• the optimal compromise between print time and transparency must be chosen individually depending on the application

A specific guideline for the ratio between print time and transparency is difficult to establish, as it heavily depends on the printer, the settings used, and the filament.

Material Consumption / Print Data

At normal print speed, the model requires approximately 4 hours of print time and consumes approx. 200 g of filament.

It was printed with a 0.8 mm nozzle in a solid design to achieve the highest possible stability.

Depending on the printer, filament, and slicer settings, print time and material consumption may vary slightly.