Smoggy3D

cover

bunnycarrot_ams.jpg

bunnycarrot_split2.jpg

render2.jpg

Body

plate_1.png

Eyes

plate_2.png

Nose

plate_3.png

Carrot

plate_4.png

Stem

plate_5.png

d89a7c1446eb472f.jpg

No AMS needed!Parts need to be glued in.

Separate Parts, 0.12mm layer, 2 walls, 10% infill

AMS, 0.16mm layer, 2 walls, 10% infill

Kangaroo

rDZ6AukHR6iZCmaNIqH7sw.jpg

Wanted it a little bigger. 140% scale.10.5cm tall.Rabbit is printed in 0.2 height, everything else is 0.12.

Larger 140% scale - 10.5cm tall

Other parts

The Endless River

PXL_20260327_191449431.jpg

PXL_20260327_191505716.jpg

Identical to the original with split parts, but everything is on two plates for both speed and convenience. (There is also a single-plate profile for those with more than one AMS, but with five colors this model won&#39;t work with just one.)<ul style="list-style-type: disc"><li>Should go without saying, but an AMS is required — unless you add pauses and manually swap filament between objects.</li><li>Be sure the print sequence remains “Print by Object” or you&#39;ll unnecessarily go through a lot of filament and waste a lot of time, completely defeating the purpose of this profile.</li></ul>If you like this profile, please remember to rate it, boost the designer and explore their other models. If you really like this profile, feel free to <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@TheEndlessRiver/upload">check out my models</a> as well and boost one (or more) of them if you have boosts to spare. 😊

All Parts on Two Plates (Print by Object - AMS required)

All parts

Identical to the original with split parts, but everything is on a single plate for both speed and convenience. Two AMS are required because there are five colors – unless you add pauses between filaments and swap spools manually.<ul style="list-style-type: disc"><li>Should go without saying, but an AMS is required — unless you add pauses and manually swap filament between objects.</li><li>Be sure the print sequence remains “Print by Object” or you&#39;ll unnecessarily go through a lot of filament and waste a lot of time, completely defeating the purpose of this profile.</li></ul>If you like this profile, please remember to rate it, boost the designer and explore their other models. If you really like this profile, feel free to <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@TheEndlessRiver/upload">check out my models</a> as well and boost one (or more) of them if you have boosts to spare. 😊

All Parts on One Plate (Print by Object - 2x AMS required)

Print Happens

mini single color knitted bunnycarrot.JPG

Mini single color version -0.12mm layer, 2 walls, 10% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

🐰 Knitted Bunny With Carrot 🐰&nbsp;No AMS needed! Parts need to be glued in.

Knitted Bunny With Carrot - Easter

ASIA

Print Profile(6)

Bill of Materials

Description

Comment & Rating (94)

License

Related Models