Stepper Motor Cover P2S Protection Dust Cover - Free 3D Print Model

Search models, users, collections, and posts

Raffi_8020

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

P2S

X1E

P1P

X1 Carbon

H2C

H2D

P1S

A1 mini

H2D Pro

H2S

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

37 min

1 plate

5.0(9)

0.16mm layer, 2 walls, 15% infill

Designer

33 min

1 plate

Open in Bambu Studio

Boost

155

Released

Description

Content has been automatically translated.

Show original

This P2S stepper motor cover was developed to protect the stepper motors and belts while enhancing the aesthetics of the printer.

The design ensures that the motors have sufficient space, preventing any rubbing or restrictions. Additionally, the cover is precisely engineered to easily snap into place and remain securely fixed.

For optimal use, an open design was deliberately chosen. Since stepper motors can reach high temperatures during extended operation, the integrated slots provide better heat dissipation and help prevent heat buildup.

Also available in a polygonal look.

Comment & Rating (21)

@NotDre

Printed very well but the right cover does not have enough space and makes contact with the pulley

The designer has replied

@user_330372171

Thank you very much for your feedback Actually, the version with the polygon pattern was designed a little too tightly. I’ve just adjusted the model and updated the print profile accordingly. Please feel free to print it again. It should fit now

@NotDre

Replying to @user_330372171 :

Thank you I will give it a go again

@xDeymos

Hello, can I ask you for the link of the green panel you have in the back of the photo

Show original

@L3sd3r

The print profile is no longer public

Encaja perfecto

@Horal3k

Printed in ABS due to the inside temperatures for X2D. Fits perfectly and looking AWESOME. One thing to consider: I cut one of the clips off on both covers. Maybe I'm too cautious, but I don't like the position of the belt. On the left side, it is tighter to the left side. On the right side, on the right. When you take a closer look, it looks like the belt itself could be in touch with the clip itself. I am not sure if it's touching, so I cut it. Even on 3x clips, it holds perfectly. I know this profile is for P2S; maybe the belt position is different on X2D.

@user_695771723

Print Profile

0.16mm layer, 2 walls, 15% infill

Work Great and fit perfectly. Thanks for the share.

The profile uploader has replied

@user_330372171

Gladly, thank you very much for the rating

Show original

@xDeymos

can I print it also in PETG or is it dangerous

The designer has replied

Show original

@user_330372171

You can generally try it with PETG, but I can't guarantee that it will hold up well in the long run, as PETG is at the limit with the temperatures of the steppers and can deform. The safer choice would definitely be ABS or ASA

Show original

@RustySausage

Print Profile

0.16mm layer, 2 walls, 15% infill

@user_2076464119

Print Profile

0.16mm layer, 2 walls, 15% infill

@3d_mic66

Print Profile

0.16mm layer, 2 walls, 15% infill

@user_2615605752

The print profile is no longer public

@Pe1979

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.