3D Printed Angel Figurine | Transparent Textured Winged Beauty

This 3D Printed Angel Figurine is modeled after a winged beauty, with an overall translucent pale yellow hue, featuring delicate, layered wings with clear textures, smooth character lines, and an elegant, flowing pose. The translucent material enhances the ambiance when light passes through, with high detail fidelity.
Printing Parameters
Printer: Bambu Lab P2S
Filament: Transparent PLA (Pale Yellow)
Layer Height: 0.15mm (Balances detail and speed)
Temperature: Nozzle 200℃, Heated Bed 60℃
Infill: 15% (Lightweight + Support strength)
Supports: Full supports (Reinforce fragile areas like wings and limbs)
Notes
The wings are delicate and prone to breaking, so remove supports slowly after printing to avoid forceful operations
PLA Filament is relatively brittle; when removing supports, it's recommended to use needle-nose pliers with a utility knife to prevent the wings from cracking
Maintain indoor ventilation during printing. PLA has poor heat resistance, so avoid exposing the finished product to high temperatures, direct sunlight, or heat sources
Post-processing can involve lightly sanding the edges to enhance transparency, avoiding excessive sanding that might damage the texture
Handle the finished product gently and secure it with a base to prevent tipping and damage