Ryobi Workshop blower adaptor - Free 3D Print Model

Search models, users, collections, and posts

ippe__

Tools>Other Tools

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 5 walls, 15% infill

1 h

1 plate

5.0(27)

Open in Bambu Studio

Boost

329

390

237

Released

Description

The blower is RYOBI ONE+ R18TB-0, and it's about 60 euros here in Europe. The blower has very good air flow but to get most use out of it, you really need some adaptors for it. This adaptor fits our camping mattresses and I'm sure all paintball bunkers available commercially, at least the ones I tried. I have not yet tried it on swimming toys, since my kids forgot all of them to a cabin they were visiting last week. I think the outer diameter (of the smaller tube) is 17.5 mm.

The best part of this adaptor is, that it actually fits the blower totally perfectly, unlike the hose part that came with it, which is very hard to put on and off.

Print instructions

It takes 9.6 meters of filament when printed with skirt.
Printing time is under 3 hours with print speed of 60 mm/s.

No infill needed, just use 4-5 walls to get rigid part.

Comment & Rating (52)

@HealingBear

Boosted

Print Profile

0.2mm layer, 5 walls, 15% infill

Nice looking little adapter! I can’t wait to use it. I’ve been wanting something like this for my little blower. Did not even think about 3-D printing one thank you for your print.

The profile uploader has replied

@mtaphorn

Thanks for your review!

@mtaphorn

Thanks for your great review!

@user_4270418602

Print Profile

0.2mm layer, 5 walls, 15% infill

printed in PLA using designers profile print perfectly fits great

The profile uploader has replied

@mtaphorn

Thanks, Glad you like it. I'll be releasing some new nozzles for the smaller blower soon...

@mtaphorn

Thanks for the 5 Star Review!

@esmarkus

Print Profile

0.2mm layer, 5 walls, 15% infill

it fit perfectly in my P755 blower

The profile uploader has replied

Show original

@mtaphorn

Thanks for your great review!

@user_2926016221

Boosted

Print Profile

0.2mm layer, 5 walls, 15% infill

amazing. saved me 15 mins of pumping for the kids sleepover.

The profile uploader has replied

@mtaphorn

Glad you like it! Thanks for the good review...

@Darug

Hi, what a great idea, saves buying an inflator. Any chance of providing the original file so that ican be redesigned to do other nozzle sizes ( If you are unsure how to do it? Here is a link to common sizes (as per pic) IF you can add extrasa to this?

The designer has replied

@ippe__

Sorry for late response, I've been super busy. I designed this in Microsoft 3D builder, so the original file is the STL. Vajonam made a remix here: https://www.printables.com/model/259074-ryobi-workshop-blower-nozzle

@krooyh

Print Profile

0.2mm layer, 5 walls, 15% infill

fits and works well

(Edited)

@Conor_D98

Boosted

Print Profile

0.2mm layer, 5 walls, 15% infill

perfect fit

@NoobishNemo

Hello! Any chance you would be willing to share a STEP file so that this can be more easily modified? I have one of these blowers and can see a lot of use for this.

The designer has replied