OldSchool RuneScape 99 Strength Plaque V3
Print Profile(2)
Description
As the title reads, this is the level 99 OldSchool RuneScape Strength plaque V3.
Improvements are:
- Textured “stone wall” due to printers having a hard time with the original large/flat surface.
- Holes on the reverse side for hanging on walls. Command strips of the right size will work also.
This specific pictured model was printed using an X1C with 5 AMS slots total.
Layer height of .16 is used to ensure small portions are properly constructed. An outer brim of 5mm is used to help prevent warping, and a brim-object gap of .30mm is used to ensure brim does not completely stick to the plaque. A Cool plate supertack was used for this model. The numbers in my model are Silk Gold PLA for the extra effect.
If printing with a single AMS/AMS Lite, find the print profile for the Single AMS. These are the instructions:
Start: Slot 1 - Black Slot 2 - Gold Slot 3 - Gray Slot 4 - Dark Brown
Pause at layer 64: Slot 1 - Black Slot 2 - Gold Slot 3 - Gray Slot 4 - Light Brown/Tan
Refer to the photo in “Single AMS” Print profile for AMS Mapping
Thank you, and let me know if there are any improvements to be made.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)