Search models, users, collections, and posts

Window Mew

StudioPolyform
Art>Sculptures
IP Report

Print Profile(3)

All
A1 mini
H2S
H2C
P2S
X1E
X1 Carbon
P1S
H2D Pro
A1
X1
P1P
H2D
X2D
A2L
0.2mm layer, 2 walls, 10% infill
0.2mm layer, 2 walls, 10% infill
Designer
2.7 h
1 plate
5.0(3)
0.2mm layer, 2 walls, 10% infill
0.2mm layer, 2 walls, 10% infill
Designer
10 h
1 plate
5.0(3)
Eyes Fixed 0.2mm layer, 3 walls, 8% infill
Eyes Fixed 0.2mm layer, 3 walls, 8% infill
Designer
25.7 h
4 plates
5.0(1)
Open in Bambu Studio
Boost
555
1537
27
19
465
277
Released 

Description

This 3D model was created using  Nomad Sculpt. The design has been carefully adjusted for 3D printing, with attention to structure, balance, and printability.

 

Please be careful when removing the supports, as some smaller parts may be fragile and could break if handled too roughly. If anything doesn’t work as expected, feel free to let me know. As a sidenote, I’m still at the beginning of my journey in 3D design, so I’m continuously learning and improving. 

 

⚠️ Beta Model Disclaimer

This is a beta version of the model. The overall design is functional, but the eyes are not yet fully refined and may require minor adjustments or post-processing depending on your print settings.

I’m actively working on improving this part of the model, but I wanted to share it already so others can enjoy, test, and provide feedback. Updates will follow as improvements are made.

Thanks for your understanding and for helping shape the final version 🙌

mew
window
pokemon
beta
pink
squished
statue

Comment & Rating (27)

(0/1000)
@user_4033949678
⭐️⭐️⭐️⭐️⭐️
4
Reply
@Azurion28
Cute print, perfect for holding some mangas. The eyes are a bit finicky to place and not perfectly done but it does the work. Would have loved to get both eyes each in a single piece to either paint them or multimaterial print them and have better result but it still gets the job donee.
The designer has replied
designer
2
Reply
@user_1710469823
The fix is online 😁 feedback always welcome, also added a fuzzy skin variant 😊
1
Reply
@uoYredruM
The print profile is no longer public
Overall, nice model but the eyes are really bad. I didn't see the fixed eye profile until after I printed this one and was trying to glue the eye pieces together. They're really wonky looking and basically just stack without much fluidity. I printed it for my wife though and she loves it so that's all that matters.
The profile uploader has replied
profile
1
Reply
@user_1710469823
I uploaded a fix and got rid of the old profile so there are no mix ups anymore ;)
0
Reply
@Rugaru_3D
Print Profile
0.2mm layer, 2 walls, 10% infill
such a great helper
profile
1
Reply
@RoseCat
Just a recommendation with the head. Make sure to have the filament flushing at a high enough value so it doesn’t mix with then new filament. Other than that it’s a great print.
The designer has replied
designer
1
Reply
@user_1710469823
Do you have a printprofile you are willing to share ? 😁
1
Reply
@RoseCat
Replying to @user_1710469823 :
oh no I just saw that on the picture and knew that was he problem. I recommend doing the autofill for the purge but it’s up to you
0
Reply
@user_1710469823
Replying to @RoseCat :
Do you mean the color change in the pink ? I just ran out of pink 😅🫣
1
Reply
@user_3644933699
The print profile is no longer public
the eyes are printed poorly
The profile uploader has replied
Show original
0
Reply
@user_1710469823
Did you print the new fixed file ?
0
Reply
@user_3644933699
Replying to @user_1710469823 :
I am new to the world of 3D printing, I don't know how to find the fixed file
Show original
0
Reply
@user_1710469823
Replying to @user_3644933699 :
on the right you can choose the print profile you want and there is the one on the bottom called eyes fixes :)
0
Reply
@nomansguy
The print profile is no longer public
Very, very cute model. His right eye is a bit wonky but I knew this going in as the creator mentions this. I would love to see a fix.
The profile uploader has replied
profile
1
Reply
@user_1710469823
The fix is online 😁 feedback always welcome, also added a fuzzy skin variant 😊
0
Reply
@Yamimoto85r6
Boosted
nice file
1
Reply
@ginowijnja
Print Profile
0.2mm layer, 2 walls, 10% infill
print is very good. printed it with 2mm nozzle and is nearly perfect
profile
1
Reply
@beoldham3d
Print Profile
0.2mm layer, 2 walls, 10% infill
profile
1
Reply

License

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

Related Models

Pokemon Mew & Mewtwo - "The Genetic Paradox"
Pokemon Mew & Mewtwo - "The Genetic Paradox"
Clean Studio
2.2 k
1.6 k
Mew Multicolor
Mew Multicolor
entroisdimensions_figurine
5.5 k
1.7 k
Pokemon Mew
Pokemon Mew
madboy
2.2 k
1.2 k
Mew Chibi
Mew Chibi
Atseini
5.2 k
3.2 k