97-01 Jeep XJ 6 Gang Switchboard Ash Tray Mount
Print Profile(1)
Description
This ash tray insert should work on all 1997-2001 Jeep Cherokees and an Auxbeam 6 Gang Switchboard. It does no interfere with the shifter when in the 1-2 Position. It should fit into the oem ash tray slot with no screws. A Small hole will have to be drilled on the inside of the center console to pass the wire for the switch panel through. The mounting plate is fastened to the ash tray insert with two M3x12 Self Tapping screws. The switchboard is mounted to the mounting plate using the oem hardware included in the kit. I recommend printing it in ABS or ASA to handle the heat.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)