Modular Diorama Set for 1:12 Scale Action Figures

Modular Diorama Set for 1:12 Scale Action Figures

Here's a modular diorama set to add a little extra detail to your bookshelf 1:12 scale diorama displays. The floor and wall sections are just barely under 6" (floors 6" square) and the wall height is 9.5". This makes the diorama set fit neatly on most 12, 24, or 36" wide and 12" deep bookshelves. There is a floor plate, a plain wall plate, a corner wall plate, and a wall plate with a non-opening door. There are optional connectors that you can print out to keep the wall or floor plates aligned with each other. Note that this is not intended to be a free-standing playset, it is designed to fit on and be supported by a bookshelf, as shown in the photos. (Seen in the images is my GI Joe Classified Dreadnok Bar.)

Some notes about assembly: 
Be warned that assembly is a bit fiddly if you use the floor connectors; you want to start at the back, placing the corners first, and work your way forward as you assemble. The connectors are only to maintain  alignment, they don't lock the pieces in place, so don't expect to assemble the whole diorama on a table and pick it up to place on the shelf. If you're not worried about the sections getting bumped out of place, you don't need the floor connectors.