Amazon HueForge
Print Profile(1)
Description
Artwork source Pinterest.
Then used HueForge v0.9.3 to create the model.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Size is 150x200mm. You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 1.92mm and the Actual Depth is 1.92mm.
It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.
Filaments Used:
PLA Anycubic Black Transmission Distance: 0.3
PLA Sunlu Meta Grey Transmission Distance: 3.5
PLA Elegoo + Gray Transmission Distance: 3
PLA Elegoo Basic White Transmission Distance: 7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Grey
At layer #11 (0.96mm) swap to Gray
At layer #15 (1.28mm) swap to White for the rest.
Share your prints and…
Boost Me (for free)
Thank you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)