Mr. Hurley & the Powder Monkeys Caricature 150x150
Print Profile(1)
Description
ARRR. Ahoy, ye landlubbers Are you fans of the wonderful pirate band from Caribbean Osnabrück And you like caricatures And HueForge images And 3D printing anyway AYE Then you're in the right place
I present to you:
MR.HURLEY UND DIE PULVERAFFEN
The dimensions are 150mmx150mmx2mm
Layer height: 0.2mm
Infill density 100%
This print uses 3 different filaments For the gray tone, I recommend normal gray Light gray might also work I advise against dark gray Personally, I used the filaments that I also listed here in the "parts list"
If you are not using an AMS, then enter the filament change pauses at the following layers in your slicer:
Change instructions:
- Start with BLACK
- At Layer #6 (0.68 mm), change to GRAY
- At Layer #12 (1.16 mm), change to WHITE and print the rest with it
Layers: 0.00 - 0.68 black
0.68 - 1.16 gray
1.16 - 2.04 white
In the end, it should look like this (Here in the photo, the frame is already around it)
The size of the image can be increased or decreased However, please be careful not to change the Z-axis
Boost Me (for free)
I would be happy about a BOOST Every boost is motivation to continue THANK YOU
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)