M-VAVE Tank B Tank G angle supports

I’ve had the M-VAVE Tank B for a while, but its flat angle on the floor always bothered me. So I designed supports that give two viewing angles: one for live use on the floor and another for desk setup and tuning.

Instead of separate interchangeable parts or a hinge (which wouldn’t be durable), I made two clip-on pieces. The 10° base piece stays tightly attached at all times. For desk use, you can clip on an additional adapter that adds 45°, giving a total 55° tilt for better visibility.

I don’t recommend frequently removing the 10° (yellow) piece, as it’s intentionally very tight to stay secure during live play. Printing at 101% is also an option if you need to remove often the yellow part, just make sure also to print the blue one to 101%. This angles are optimized for my height, desk height, etc…. I've attached also the STEP files you can retune-it based on your preference. When changing just make sure that the yellow part has supports enabled and the blue one does not.

In summary:
1) Floor setup: Yellow = 10°
2) Desk setup: Blue+ Yellow = 10° + 45° = 55°.

I only have a Tank-B but from what I've seen it shares the same enclosure (just different colour) from the Tank-G, I belive it should work.
 
Any ideas for improvement are welcome! Enjoy and play a lot of music!!