Lorena_Patatin_Patatan

cover

WhatsApp Image 2026-03-25 at 11.02.03.jpeg

corazon motosierra NO ams.jpeg

corazon motosierra ams.jpeg

plate_1.png

e6a0fc638ca6f958.jpeg

<ul><li>Altura de capa 0,20 mm.</li><li>Impresión sin soportes.</li><li>PLA</li><li>Colores: negro, rojo, naranja y amarillo.</li></ul>

<ul><li>Layer height 0.20 mm.</li><li>Print without supports.</li><li>PLA</li><li>Colors: black, red, orange, and yellow.</li></ul>

0.2mm layer, 2 walls, 15% infill

WhatsApp Image 2026-03-25 at 11.14.13.jpeg

<ul><li>Altura de capa 0,20mm.</li><li>Se imprime sin soportes.</li><li>PLA</li></ul>

<ul><li>Layer height 0.20mm</li><li>No supports needed</li><li>PLA</li></ul>

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Me gusta imprimir marcapáginas acorde con el libro que vaya a leer.&nbsp;Como no encontraba ninguno para el libro “Mi corazón es una motosierra”, pues lo he creado.&nbsp;Las medidas son:  X 150,00 mm,  Y 71,96mm,  Z 3,00mm.&nbsp;Impreso en PLA.&nbsp;Puedes variar las medidas, pero ten en cuenta que también variarán las capas, por lo que deberás ajustar los cambios de colores para que se imprima bien.&nbsp;Se puede imprimir con o sin AMS.&nbsp;Para imprimir SIN AMS:&nbsp;<ul><li>Empezar imprimiendo con filamento negro.</li><li>En la capa 6 cambiar a filamento rojo.</li><li>En la capa 8 cambiar a filamento naranja.</li><li>En la capa 10 cambiar a filamento amarillo.</li></ul>Por supuesto que puedes cambiar los colores y poner los que más te gusten.&nbsp;&nbsp;

I like to print bookmarks that match the book I'm going to read.&nbsp;Since I couldn't find one for the book “My Heart Is a Chainsaw”, I created it.&nbsp;The measurements are: X 150.00 mm, Y 71.96 mm, Z 3.00 mm.&nbsp;Printed in PLA.&nbsp;You can vary the measurements, but keep in mind that the layers will also vary, so you will need to adjust the color changes for it to print correctly.&nbsp;It can be printed with or without AMS.&nbsp;To print WITHOUT AMS:&nbsp;<ul><li>Start printing with black filament.</li><li>At layer 6 change to red filament.</li><li>At layer 8 change to orange filament.</li><li>At layer 10 change to yellow filament.</li></ul>Of course, you can change the colors and use the ones you like best.&nbsp;&nbsp;

Print Profile(2)

Description

Comment & Rating (0)

License

Related Models

Bookmark "My Heart Is a Chainsaw"

Print Profile(2)

Description

Comment & Rating (0)

License

Related Models