NVG-79 MK1

Are you looking to get your foot in the door when it comes to digital NV, without having to spend an arm and a leg? This was designed from the ground up with affordability in mind, using minimal non-printed components. STEP files included for all parts, so you can customize it to any different hardware choices you desire. Powered from a USB Type-C port to allow you to choose the power pack that works for your needs. Printed with 0.2mm layer height for maximum durability. If using a Caddx Ratel Pro, choose file "NVG-79 MK1 Base wCaddex Board". If you do not want to use a menu board, or do not have the Caddx menu board, choose file "NVG-79 MK01 Base w-o Board" and do not print the spacer. 

Tools Required:

Soldering Iron

Solder

Third Hand Wire Holder

Flux(preferable)

3D Printer of Choice. Will fit on everything from A1 Mini and larger. 

Parts List:

2" NTSC/PAL 640x240 Analog Display: https://shorturl.at/G7jXb

Caddex Ratel Pro FPV Camera: https://shorturl.at/ZvufR

37mm Dia. 42mm Focal Length Biconvex Lens: http://tiny.cc/4zd0101

ALMOCN USB Type C Connector: https://shorturl.at/dpMQs

6mm Long M4 Heatset Threaded Inserts: http://tiny.cc/8zd0101

10mm Long Cap Head M4 Screws, Flat Washers and Lock Washers. I used this set, but you can use any: http://tiny.cc/bzd0101

Arm is designed to use the dovetail included in the polymer version of this mount: http://tiny.cc/npt0101 but STEP file is included to modify how you see fit

Current design uses 3/4" length 8-32 nuts, bolts and washers to mount the arm. Will post a revised version down the road that utilizes the same M4 threaded inserts and screws. Will post instructables at a later date detailing assembly instruction.