Cruiser Skateboard Lamp based on Ikea KRUSNATE
Print Profile(1)
Description
Made this Lampe based on Ikea Krusnate Lamp (5€ at Ikea).
You will need these things additionaly:
E14 Sockets:
https://amzn.eu/d/0c0Js06L
LED-Bulbs:
https://amzn.eu/d/0e7042W0
- Wires
- wago clamps
- 4 Bolts and nuts M4x 40
- KRUSNATE Lamp
- Cruiser Skateboard (Crivit or similar)
We start with takeing KRUSNATE apart.
It is pretty easy.
1.
unscrew the e14vsockets:
2.
pull the Sheet Metal cylinder off
Like this:
3.
Take the GU10 Socket Out and seperaten the plastic part from the cersmic Socket:
5.
lift the metal contact, and pull Out the wire:
Do the wireing.
I used two Wago clamps.
It is tight but it fits:
The base of the led gets quite hot (Up to 60°). So pla+ or petg are recommended.
The rest is like assembling a Skateboard.
Hope you/your Kids enjoy the lamp!
PS.
I am not responible for your house burning down. Ask an electrician for wiring!
Use common sense.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)