Gohan SSJ2 – Dragon Ball Hueforge

🧩

Gohan SSJ2 – Dragon Ball Edition (Ultra Detailed)

Immerse yourself in the legendary intensity of Dragon Ball with this portrait of an enraged Gohan SSJ2, ready to defeat the terrible Cell with this unique creation

Every detail has been meticulously crafted to capture all the power and rage of the character in an impressive 3D printed rendition

This model highlights contrasts and volumes for a striking visual effect, perfectly suited for Hueforge technology

To support my work, you can send me a PayPal donation of any amount you wish (even 1 or 2 € or $ is appreciated) via this link:

https://paypal.me/samgamji00

🔥

Highlights

• Ultra-precise facial details (gaze, scars, expression)
• Exceptional depth effect thanks to Hueforge mapping
• Optimized contrasts for a sharp and clean rendering
• Design specially conceived for multicolor printing

🎨

Recommended Configuration

• Number of colors used: 9

   

  For those without an AMS

  - Black to start

  - Pause at the 15th layer at 2:32 to add blue
  - Then 17th layer at 3:07 min to re-add purple
  - 19th layer at 3:41 min to re-add black
  - 20th layer at 4:07 min to re-add purple
  - 21st layer at 4:29 min for red
  - 23rd layer at 5:22 min for orange

  - 26th layer at 6:30 for oak or beige

  - 32nd layer at 7:50 for yellow

  - 35th layer at 8:14 for green

  - 38th layer at 8:32 to re-add yellow

  - 40th layer at 8:44 to add white

   

   

         For those with an AMS

You will need to make several changes to your AMS but nothing complicated, I'll explain.

Start by putting black in AMS slot 1, blue in 2, purple in 3, and red in 4.

Set an alarm for approximately 4:30 and wait for it to print red. As soon as it switches to red, remove the black, blue, and purple from the AMS and replace black with orange, blue with oak or beige, and purple with yellow.

When beige starts printing around 6:30 into the print, replace orange with green

When yellow starts around 7:50, replace beige with white

And then you let it print until the end.

It seems complicated like this, but in reality, it's very simple

⚙️ Recommended print settings

• Layer height: 0.08 mm (top quality)
• Total thickness: ~2 to 2.4 mm
• Good calibration recommended

🧠

Tips

For optimal results:

• Use quality filament (Bambu / Sunlu / eSun)

💥

Why this model is special

This Hueforge is not just an image

it's an artistic piece that brings one of Dragon Ball's most iconic characters to life with a stunning embossed effect once printed

🙌

Support

If you like the model:

• Leave a like 👍
• Share your print 📸
• Follow me for more Hueforge creations 🔥

To frame them, I highly recommend the custom Hueforge frames that yc3ddepannage made, which are clip-on and connectable to display the entire series. Do not hesitate to support him as his work complements mine well

Here is the link:

Modular Dragon Ball Z Hueforge Frame - Free 3D Print Model - MakerWorld