Greyhound Sculpture Decor

Practical 3D Printed Solutions

Functional, workshop-ready designs focused on durability, easy printing, and real everyday use.

Clean, reliable parts with minimal supports (when achievable) and strong geometry — made to print fast and work immediately.

PRINTER:
Bambu Lab P2S

MATERIALS

PLA for most models.
ABS recommended for higher strength or heat resistance.

MINIMUM 3 WALLS, AND GYROID INFILL, FOR LESS PLASTICKY FEEL AND SOUND (Except figurines).
 

Follow Me for containers, mounts, holders, and useful shop tools.

MODELS MADE USING AI, ARE CLEARLY STATED AS: AI-assisted.

━━━━━━━━━━━━━━━━━━━━━━
 

Greyhound Sculpture. AI-assisted.

So as the tale is a bit thin, there is a bit tricky to remove the supports, but as you see it is possible. 

AND ALSO I WOULDN'T DOWNSIZE, YOU CAN MAKE IT BIGGER BUT NOT SMALLER, THE LEGS AND THE TAIL BECOMES TO THIN FOR FDM PRINTING, AND DIFFICULT TO REMOVE THE SUPPORTS, IT IS ALREADY A BIT DIFFICULT.

━━━━━━━━━━━━━━━━━━━━━━
PRINT SETTINGS  (baseline)
• 0.2 mm layer height
• 3–4 walls
• 15–30% infill
• 0.4 mm nozzle

TYPICAL HARDWARE
• 10×3 mm magnets
• steel washers
• M3 screws / inserts

Feedback and Improvements are welcome.

━━━━━━━━━━━━━━━━━━━━━━

OTHER DESIGNS.

━━━━━━━━━━━━━━━━━━━━━━
Designed by SHARER