harley quinn and joker

Project: Arquelina e coringa 2.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 381.09x381.09mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #8bd5ee PLA BambuLab Matte Ice Blue  Transmission Distance: 3.5
    #d3b7a7 PLA BambuLab Matte Latte Brown  Transmission Distance: 2
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #9 (0.88mm) swap to BambuLab Basic Red
    At layer #13 (1.2mm) swap to BambuLab Matte Ice Blue
    At layer #15 (1.36mm) swap to BambuLab Matte Latte Brown
    At layer #18 (1.6mm) swap to BambuLab Basic Jade White for the rest.