Prong Extender for Telesin head mounts
Print Profile(1)
Description
When using DJI Osmo Action 5 pro with a head mount from Telesin, it really bugs me out.
Because the mount has really short arm from the mount, so I could not lower the angle of the camera with free.
For your information, Telesin mount which I use is this.
If you are using different models, it may not fit correctly.
However, I created a lengthy arm that can freely adjust the angle of the camera.
Please see about the detail below.
1️⃣ About printing setting
- I recommend using same printing direction as you opened the file (which a arm lies laterally)
- So, use the tree(auto) support. I assume this is going to be hassle, but no other chances.
- You may attempt changing print direction but the strength of the arm would be weak, so I do not recommend for that.
2️⃣ Also what you should bring
- You would need a nut to put in. I believe this is an M5 nut. ( The nut has 3.98mm thick, and has 4.41mm inner diameter when measured with vernier calipers.)
Thank you very much, and enjoy!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)