CreationBloop

cover

8cc3fc04-c9a4-40c7-8e6b-9df70f4bb338.jpg

01932386-7562-46f0-99da-c27967e10d65.jpg

plate_1.png

001234de7a27cb87.png

<h2>🧱 1. Basic Setup</h2><ul><li><strong>Layer Height:</strong> 0.12 mm <i>(best balance of detail + time)</i></li><li>For ultra detail: 0.08 mm (only if you want premium finish)</li><li><strong>Wall Loops:</strong> 3</li><li><strong>Top Layers:</strong> 5</li><li><strong>Bottom Layers:</strong> 4</li></ul><h2>🧊 2. Infill</h2><ul><li><strong>Infill Density:</strong> 10–15%</li><li><strong>Pattern:</strong> Gyroid (best for strength + smooth print)</li></ul><p>👉 This model doesn’t need heavy infill — details matter more.</p><h2>🧍 3. Orientation (VERY IMPORTANT)</h2><ul><li>Keep the model <strong>standing upright (as is)</strong></li><li>Slightly tilt back (~5–10°) if needed</li></ul><p>👉 This reduces:</p><ul><li>Face support marks</li><li>Weapon distortion</li></ul><h2>🪵 4. Supports (Critical for this model)</h2><ul><li><strong>Type:</strong> Tree (Organic)</li><li><strong>Placement:</strong> Build Plate Only <i>(if possible)</i></li><li>If parts fail → switch to Everywhere</li><li><strong>Support Density:</strong> 10–12%</li><li><strong>Interface Layers:</strong> 2</li></ul><p>👉 Focus support under:</p><ul><li>Arm</li><li>Weapon</li><li>Cloth ends</li></ul><h2>🔥 5. Temperature (PLA Recommended)</h2><ul><li><strong>Nozzle:</strong> 210°C</li><li><strong>Bed:</strong> 55–60°C</li></ul><h2>🌬️ 6. Cooling</h2><ul><li><strong>Fan:</strong> 100% after layer 3</li></ul><p>👉 Keeps fine details sharp</p><h2>⚡ 7. Speed (Don’t go fast here)</h2><ul><li><strong>Outer Wall:</strong> 40–50 mm/s</li><li><strong>Inner Wall:</strong> 80 mm/s</li><li><strong>First Layer:</strong> 20 mm/s</li></ul><p>👉 Slower = cleaner face &amp; details</p><h2>🎯 8. Extra Quality Tweaks (IMPORTANT)</h2><ul><li>Enable <strong>“Slow Down for Overhangs”</strong></li><li>Enable <strong>“Detect Thin Walls”</strong></li><li>Turn on <strong>“Adaptive Layer Height”</strong> (🔥 big improvement)</li></ul><h2>🧪 9. Material Suggestion</h2><p>Best results:</p><ul><li><strong>PLA Matte (Highly Recommended)</strong> → hides layer lines</li><li><strong>Standard PLA</strong> → good</li></ul><p>Avoid ABS for this type</p>

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2>🛕 3D Printed Warrior Goddess Sculpture</h2><p>A highly detailed <strong>3D printed warrior goddess model</strong> capturing strength, grace, and divine presence. Perfect for décor, पूजा spaces, or collectors.</p><h2>📏 Size &amp; Scale</h2><ul><li><strong>Scale:</strong> 100%</li><li><strong>Height:</strong> 174 mm</li><li><strong>Width:</strong> 116.98 mm</li><li><strong>Depth:</strong> 112.42 mm</li></ul><h2>✨ Features</h2><p>High-detail finish</p><ul><li>Strong &amp; stable base</li><li>Ideal for display or painting</li></ul><h2>❤️ Support</h2><p>If you like this model:<br>⭐ Boost it<br>📝 Leave a review with your feedback</p><p>Your support helps create more designs!</p><p>&nbsp;</p>

Print Profile(1)

Description

🛕 3D Printed Warrior Goddess Sculpture

📏 Size & Scale

✨ Features

❤️ Support

Comment & Rating (1)

License

Related Models

MAHAKALI