ESP32-C3 Jammer Case (4x6cm Prototype Board)

⚠️ IMPORTANT: Educational Purposes ONLY ⚠️ This project is designed strictly for educational research and laboratory testing. Please ensure you follow all your local radio frequency regulations. Use this housing only to build a module for controlled experiments, RF shielding studies, or antenna design. The creator assumes no liability for any misuse. This design is optimized for an ESP32-C3 on a 4x6cm prototype board.

Key Features & Assembly Tips:

• Educational Module Housing: Perfect for constructing a functional, professional-looking electronic module for testing in a Faraday cage or educational lab setting.
• Cable Management: Engineering clearance allows you to use standard 5cm wires  and still fit everything neatly.
• Removeable Promotion: The text on the back can be easily removed or edited directly in Bambu Studio if you prefer a clean look for your lab notes. The "ESP" title remains for clear identification.
• Perfect Fit: Tailored specifically to host an ESP32-C3 and a standard 4x6cm perfboard.
• Precision Build: Everything is on a tight fit to ensure a solid, no-rattle construction. Depending on your execution, minimal cutting might be needed.
• Assembly Workflow: Print the case first, then test-fit all components before you start soldering.
• Recommended: A drop of superglue is recommended for the final seal once your lab equipment is tested and finalized.

Tutorial & Educational Guide

This project was based on this youtube video, so if you want to build exactly the same model you can do it with this tutorial: 

Support the Project!

If this model helped you with your educational build, please consider leaving a Like and a Download!

P.S. My "Quality Control Assistant" (the dog in the photos) worked very hard supervising this project from his comfortable post. He tells me that your thumbs-up are worth at least one virtual treat to him! 🐾