Horse head flowing mane wall art
Print Profile(1)
Description
Boost Me (for free)
If you wish to support my projects I would be grateful. Thank you,
This stylized drawing depicts a horse head created with a single continuous stroke: it is a stylized linear work of art depicting a horse's head with a flowing mane.
Great for gifting or as a wall decoration, office furniture, home, church or places of worship for horse lovers.
The model can be enlarged as desired by the slicer. The thickness can also be increased, (I advise against shrinking the model and reducing the diameter because the lines are thin and to achieve an acceptable printing level I made several attempts and this is the minimum size).
The colors can be varied from the slicer. This was printed with black Bambu Lab filament.
It does not require additional assembly and can be hung with double-sided tape or small nails (I have prepared 3 small holes: 1 under the snout, one where the mane is, and one on the ear).
A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then drying it with compressed air, avoiding touching the surface with your hands. I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. It is these small adjustments, along with many others, that determine the success of a good print.
Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to experience problems, do not hesitate to contact me, we will look for solutions together in a perfect collaborative atmosphere. I have made several prints of this object and they all came out perfect as in the photos: if you have wrong parameters, dirty or clogged nozzles, poorly calibrated machines, damp or poor quality filaments, don't blame me.
Happy printing everyone!
PRINTING INSTRUCTIONS:
- Layer height 0.2 mm
- Initial layer height 0.2 mm
- Wall loops 2
- Top shell layers 5
- Bottom shell layers 3
- Infill 15%
- Grid pattern
- No supports
- Outer wall speed 200 mm/s
- Inner wall speed 300 mm/s
- Normal print acceleration speed 10000 mm/s
- Outer wall acceleration speed 10000 mm/s
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (3)