Sagrotan No-Touch Bottle Refill Nozzle (READ 1st!)

Stop Overpaying for 🧼 Refills! | Sagrotan / Dettol / Lysol No-Touch Bottle Refill Nozzle

Why keep buying expensive original Sagrotan/Dettol/Lysol No-Touch bottles when you can buy any brand’s liquid soap XXL refill pack for a fraction of the price? Take control of your soap choices and save money with this custom-fit refill nozzle!

This nozzle screws directly onto standard liquid soap refill packs, allowing you to easily transfer soap into your No-Touch bottles. To pair with the nozzle you can also download/print this simple No-Touch bottle detach tool. If you happen to have a refill pack that doesn't fit the nozzle thread, you can print and attach my screw-on funnel instead.

🖨️ 🛠️ Print Profiles & Assembly

I’ve provided two ways to print this part:

1. The "Two-Part" (Recommended)
   To ensure a leak-proof seal and maximum durability, this version is printed in two parts. The bottom (screw) part is printed in reverse to make a perfect internal flange for a tight lateral seal.
    
   • Assembly: Remove supports from the top side of the bottom part and simply glue the top part into the bottom part with a drop of superglue.
      
2. The "Single-Piece" (No Glue)
   For those who prefer not to use glue, I’ve included a profile to print the nozzle as a single unit.
    
   • Important Note: This profile includes supports for the internal flange. Because of the print orientation, the flange might snap if you overtighten the adapter.
      

💡 Refilling Tip (The "Pump" Method)

Since the opening of the No-Touch bottle is relatively small, you can speed up the process of refilling by using the bottle itself as a pump:

• Connect the nozzle: Pay attention to the orientation (see photos).
• Position: Place the No-Touch bottle below the refill pack.
• The Pump: Alternately squeeze the refill pack and then the No-Touch bottle.

This creates a pumping action that quickly "vacuums" the soap out of the refill pack and into the bottle without any mess!