Mosquito Net Reverse Clips for Jarolift Brushline

My Mosquito Nets from Jarolift tend to fall out, even in moderate Winds.

That’s why I designed a clip that can be attached to the Mosquito Net using an 8mm drill bit and an M3x15 (I only had M3x20 as seen in the Pictures) screw and nut. The clip holds the Net in place from the outside, preventing it from falling out. In combination with the provided Metalclips, the Mosquito Nets are beeing hold much more secure.

It can be locked and unlocked from the inside. I use 4 of these per Net.

I highly recommend PETG, as its much more durable for Outdoor use. Do not use PLA.

Instructions:

1. Stick the Nut and the Screw in the Head and the Clip
2. Drill an 8mm hole in the frame of the Mosquito Net (keep at least 1cm away from existing Clips)
3. Stick the clip in from the Outside, the Head from the Inside
4. Screw hand tight

Its my first own model which involves multiple Parts and Screws. Hope you like it.👌

NOTE: 

The selecte Screws from the Bambu Shop will probalby not Fit. The Head ist 5.4mm diameter. The Screws I have only have 5.0mm Head diameter.