Red Yellow Blue White Layered Han Li's Great Geng Sword Array Fidget Refrigerator Magnet kit card

Full-color Han Li's Great Geng Sword Array that can be printed with just four colors (red, yellow, blue, white)

There is no direct connection between the sprues and the model; it relies solely on the lateral adhesion between the lines and can be removed with a slight effort, not heavily depending on sprue cutters.

Additional accessories required: glue, 12*2mm round magnets

Han Li figures facing left and right are provided; please assemble as needed.

Assembly sequence:

1. Assemble the magnet in the center of the magic array;

2. With Han Li's white side facing up, place the 18 flying sword rings outside the white circle;

3. Place the 24 flying sword rings outside the white circle; it is recommended that the bottom surfaces of the two flying swords touch each other for smoother rotation;

4. Install the magic array with the magnet in the center of the circle on Han Li's back; if it's a bit loose, a little glue is needed to reinforce it, but do not affect the rotation of the flying sword rings;

5. Once assembled, you can try to flick the two circles of flying swords to see if they can rotate freely.