SAAMI-ish 22 Long Rifle
Print Profile(2)
Description
Boost Me (for free)
If you enjoy my work, please consider supporting me by downloading, printing and/or boosting.
About SAAMI-ish:
Most cartridges of the world are standardized. There is two major standardizing institutes in the world - one of them is called S.A.A.M.I. SAAMI-ish 2d wall art is inspired by their standards.
SAAMI-ish is fan-art. Each board are my interpretation of the SAAMI standard for that specific cartridge. All measurements come from the SAAMI standard when the cartridge is standardized - but remember, these are interpretations and as such they are NOT, by any means, at scale.
All cartridges are available in both metric and imperial with the exception of the few non SAAMI cartridges, those are only available as metric.
About 22 long rifle:
The cartridge, also known as 22lr, was designed in 1887 with the 22long as a parent case. It is by far the most sold cartridge in the world and it's mainly used as a hunting and sports shooting cartridge even though it has been used in some military applications.
Wikipedia has articles on 22 long rifle.
About the other cartridges:
Curious about other cartridges? I am currently collecting my SAAMI-ish in a MakerWorld collection that you find here:
https://makerworld.com/en/collections/14764696-saamish
About the frame:
The frame can be printed with a stand for table placement, Skadis/Skådis pegs for mounting the frame to a Skadis/Skådis board or pegs and bracket for a french cleat style mount on a wall. Print the frame and which ever mounting you prefer, then print your favorite cartridge(s).
The table stand will mount in the center of the frame.
The skadis/skådis pegs has a snug fit by design but different printers and different filaments will push tolerances and depending on those factors it will be more or less snug. If it seems too loose, a drop of super glue may solve the problem. I recommend using the same filament and color for the pegs as the frame.
The french cleat uses the same technique as the skadis/skådis pegs. Just mount the correct peg on the frame, screw the bracket to the wall and hang the frame. The bracket has three mounting holes that can be reached through the frame, before placing the art piece, making it easier to level the frame.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)