Tamiya MB01 fan mount for FWD
Print Profile(1)
Description
I made this 30X30 motor fan mount for the FWD version of the MB01. It is positioned directly on the motor for better airflow.
It mounts in place of the switch with two 2.7mm screws and a 5.5 self-locking nut underneath.
I personally enlarged the switch holes by sliding the 2.7mm screws measured with a caliper (the classic 3mm ones) into the holes and then securing them with nuts, but if you wish, you can simply thread everything and screw it onto the same.
Before mounting, it is advisable to pass a 2.7mm screw through the 2.6mm holes to create the necessary threading.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)