Skadis for Ikea Bror Workbench with Drawers
Print Profile(1)
Description
Adapters for the Ikea Skadis 36x56cm (14x22") pegboard to be able to mount it to the sides of the Bror workbench with drawers. Requires no additional screws, simply use the same screws for the Bror drawers on the legs to mount the adapters and the Ikea thumb screws used to attach the Skadis to its normal mount.
You will need to print a left adapter and a right adapter. I recommend printing two of each so the skadis board can be secured at each corner but you might be able to get away with just using two at the top.
NOTE ON ALIGNMENT: You may find that the pegboard doesn't quite line up with the adapters when you first use them. If this happens you will need to loosen the screws on the legs of the Bror to fix the alignment as when assembling the Bror it's easy for the legs to not be perfectly parallel to one another.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (6)