Elegoo TPU 95A – Tuned Profile for Bambu Lab P2S

This profile is meticulously tuned for printing the flexible Elegoo TPU 95A filament (black color) on the Bambu Lab P2S printer. Through detailed adjustments and extensive testing, I have achieved optimal results for printing this challenging material.

What you can expect from this profile:

• Excellent Adhesion: Minimizes issues with prints detaching from the build plate.
• Reduced Stringing: Optimized retraction settings help prevent undesirable "hairs" or strings.
• Precise Details: Maintains object details even when printing with flexible material.
• Reliable Extrusion Flow: Ensures consistent and smooth material flow.

Recommendations for use:

• Before Printing: Ensure your print bed is clean and in good condition. For TPU, I recommend using a textured PEI plate for better adhesion.
• Printer Settings: Verify that your printer is properly calibrated.
• Filament Humidity: TPU is a hygroscopic material. For the best results, I recommend drying your filament before printing.

TIP:
You’ll get the best print results if the filament is dry and the print is run directly from the filament dryer

This profile has been thoroughly tested with a small "Benchy" boat model
and yields excellent results. I hope this profile helps you achieve successful and high-quality prints with Elegoo TPU 95A!

If you have any questions or suggestions for improvement, feel free to share your experiences in the comments.