forestslin

cover

Thinner

plate_1.png

96b4c454f3ebd1b5.jpg

Fixed the knee

3d-boss

assasd.jpg

<h2>Print Profile Optimization Details</h2>This profile has been specifically tuned for models with complex, organic geometries and topographic surface textures. The following adjustments ensure high success rates and easier post-processing:<ul><li>Wall Generator set to Arachne This setting dynamically adjusts the extrusion width to match the varying thickness of the model&#39;s topographic ridges. It ensures that the fine details on the skin are printed with consistent flow and eliminates small gaps that often occur with the &#34;Classic&#34; generator.</li><li>Top Z Distance adjusted to 0.27 mm Increasing this gap from the default 0.2 mm creates a cleaner separation between the support interface and the model. It prevents the supports from fusing to the delicate surface patterns, making them much easier to snap off without leaving scars.</li><li>Initial Layer Speed reduced to 35 mm/s Lowering the speed for the first layer improves the mechanical bond with the build plate. Since this model has small, fragmented contact points at the feet, a slower speed is essential to prevent the print from detaching during the mid-to-late stages of the process.</li><li>Sparse Infill Pattern changed to Gyroid Switching from the default Grid pattern to Gyroid prevents the nozzle from crossing over previously printed lines on the same layer. This eliminates the &#34;clicking&#34; sound and mechanical vibration that can knock over tall, slender limbs or cause layer shifts.</li><li>Support/Object XY Distance increased to 0.5 mm A larger horizontal offset ensures that the tree support branches do not accidentally merge with the sides of the figure’s legs or torso. This preserves the visual detail of the organic geometry and significantly reduces the time spent on post-print cleanup.</li><li>Enable Avoid Crossing Walls Activating this feature forces the nozzle to stay within the printed boundaries during travel moves. This prevents &#34;travel stringing&#34; from forming across the open gaps in the model&#39;s pose, resulting in a much cleaner finish that requires less manual deburring.</li></ul>

0.2mm layer, 2 walls, 15% infill -Arachne,Tuned Adhesion

gstrand99

Image.png

Prints the model upside down to minimize supports and internal supports. Only tested with Bambu PETG-HF

0.2mm layer, 2 walls, 15% infill

Jhos Fuentes

Screenshot 2026-04-16 153818.png

200% 0.2mm layer, 2 walls, 15% infill

200% 0.2mm layer, 2 walls, 15% infill

Prinlife

微信截图_20260326145147.png

Parameter Optimized Build Plate

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

挽救计划是2021年看的小说，一直到今年3月20日电影上映，非常开心。洛基的小人捏的也很有特色。需要开启支撑。--------------------------------------<boostme><boosttitle>为我助力</boosttitle></boostme>&nbsp;感谢大家支持。

Project Hail Mary is a novel I read in 2021, and I was very happy when the movie was released on March 20th this yearThe Loki figurine is also very distinctiveSupports needed--------------------------------------<boostme><boosttitle>Boost Me</boosttitle></boostme>&nbsp;Thanks for your support

Print Profile(5)

Description

Comment & Rating (609)

License

Related Models

Project Hail Mary, Rocky's handmade Xenian figurine

Print Profile(5)

Description

Comment & Rating (609)

License

Related Models