The only EBB36 Gen1 & Gen2 G2SA mount you need
Print Profile(1)
Bill of Materials
Description
This includes an EBB36 Gen1 and Gen2 mount.
I always had problems with standard EBB36 mounts, that they bent over time and heat, because they are fixed at only two points.
So I started recreating a mount from scratch, solving these problems.
The mount has 2 new melting nuts where a M3 x 8mm countersunk screw is screwed in completely. At the end of these two screws a M3 nut is placed. the nut can be fine adjusted to touch the extruder servo.
With these two screws, the mount has now 4 fixed points and it can not bent anymore. (Make sure to print it at least out of ABS because the servo is getting really hot)
Because sometimes the PCB itself is benting on the mount, I added a Pin to the mount, working as the 3rd fixpoint for the PCB.
The distance between the screws and the bottom soldered pins of the PCB is big enough. I increased the distance in the last version, thats why it is looking very tight on a few pics. It is far enough!
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)