Christian cross with Bible verse - Jesus Christ

This wall decoration is an artistic cross-shaped representation composed of the biblical verse John 3:16: "For God so loved the world, that he gave his only begotten Son"

It is a design piece intended for interior decoration such as living rooms or prayer corners

The model can be enlarged at will by the slicer, (I advise against reducing its size because to achieve an acceptable print level I did several tests and this is the minimum size). I placed it diagonally on the plate to make the most of the space

The colors can be varied from the slicer. This one was printed with black Bambulab filament

Usually 2 mm thickness is more than sufficient. So if you enlarge it on the x and y axes keep the “Uniform Scale” function active, then to reduce the thickness, uncheck “Uniform Scale” and act only on the z-axis value which you will set to 2 or 3 mm

It does not require an additional assembly process and can be hung with small nails or double-sided tape

When you detach it from the plate proceed from the bottom of the cross and  not from the arms

A tip I always give is to first clean the print plate with dish soap and a sponge, rinsing with hot water, then dry it with compressed air avoiding touching the surface with your hands. I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. These small precautions, along with many others, determine the success of a beautiful print

Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to encounter problems, do not hesitate to contact me, and together we will find solutions in a perfect collaborative atmosphere. I have made several prints of this object and they have all turned out perfect as in the photos: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, damp or poor quality filaments, do not blame me.

Happy printing everyone

PRINTING INSTRUCTIONS

• Layer height 0.2 mm
• Initial layer height 0.2 mm
• Wall loops 2
• Top shell layers 5
• Bottom shell layers 3
• Infill 15%
• Infill pattern Grid
• No supports
• Outer wall speed 200 mm/s
• Inner wall speed 300 mm/s
• Normal print acceleration speed 10000 mm/s
• Outer wall acceleration speed 10000 mm/s