Desk Stand for USW Flex 2.5G PoE
Print Profile(4)
![[Standard / PLA Basic] 0.2mm layer, 2 walls, 20% infill](https://makerworld.bblmw.com/makerworld/model/USdcd1b2815d117f/671958816/instance/c6cedb843fe8030e.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
![[Ribbed / PETG-HF] 0.2mm layer, 2 walls, 25% infill](https://makerworld.bblmw.com/makerworld/model/USdcd1b2815d117f/671960346/instance/de52caf08deaf954.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
![[Standard / PETG-HF] 0.2mm layer, 2 walls, 20% infill](https://makerworld.bblmw.com/makerworld/model/USdcd1b2815d117f/671958333/instance/f944a2b32df1629b.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
![[Ribbed / PLA Basic] 0.2mm layer, 2 walls, 25% infill](https://makerworld.bblmw.com/makerworld/model/USdcd1b2815d117f/671960457/instance/9ba3d4f64b33de21.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Description
Desk Stand for USW Flex 2.5G PoE (Model : Ubiquiti UniFi USW-Flex-2.5G-8-PoE)
You can save space by mounting the switch on the desk stand.
NoticeThe USW Flex 2.5G PoE Switch may generate significant heat in the mounting area depending on the connected PoE device, and there is a possibility of deformation with prolonged use when printed on PLA.
Since there are no long-term test results regarding this, printing on PETG is recommended.
|
This stand is available in two designs :
- Standard
It is a standard design featuring smooth walls and a Ubiquiti logo on the back.
- Ribbed
- This model features a stylish design with a ribbed texture. (In the default profile, the Infill value is set slightly higher to improve durability.)
Who is this useful for?It helps save space when installing the switch on a desk without a rack.
|
Boost Me (for free)
If you found this model helpful, please give it a boost!
ⓒ 2025-2026 klayf (HONG-SIK WON) / contact@klayf.com
For non-commercial and personal / Internal use only.
Models and prints may not be sold or used for commercial purposes.
License
Comment & Rating (2)