Transit Van Roof Top Cable Entry Cover
Print Profile(2)
Bill of Materials
Description
NOTE*** Revised design and print profile has mounting holes moved to the side of the cord grip connector for ease of mounting. ***
I designed this cable cover to fit over the factor rubber plug location at the front of my Fort Transit 250 van. There is a lip that drops down into the gutter area and provides a place to seal the cover to the roof. The wire end of the cover has a 0.850" hole to allow a plastic cord grip to be installed. The hole on the bottom side is large enough to get the lock nut in and tighten the cord grip. I would suggest applying a good bead of sealant on the bottom surface prior to screwing it through the roof. Once screwed down cover the edges and screws with a heavy layer of lap sealant to weatherproof. I printed mine from PETG White.
Boost Me (for free)
If you find this useful for your camper build, shoot me a boost! Thanks
Documentation (1)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)